Company News

How to Take Apart a Bogen 3047 Tripod Head

Gopro accessories tripod head customized camera accessioes camera bag case camera accessories

Update time : 2020-09-28 09:22:59

If you attempt to incorrectly confess apart your Bogen tripod head you could exterminate it. follow these steps to perform accordingly correctly.

.

1) touch the head from the tripod. at the bottom of the aluminum underground that holds the head above the tripod is a rubber cap. Once you gorge removed the cap arise the underground up and off the tripod.

2) mind that the rubber cap is holding an Allen wrench (it to anyway). Well, the aluminum underground is composed of two lengths. Take apart the lengths by turning the small screw at the center with the allen wrench.

3) Separate a length of aluminum underground and the head. You'll gorge to loosen a nut that is hiding up interior the tube. at the foundation of the head there are two silver colored rings that emerge parallel they to quit apart. healthy they perform and this nut is the secret. You'll lack a ratchet, a socket of the accurate size,(13mm) and an extension to come the length of the tube.

4) Remove the three screws (flat head) cottage holding those rings together. They energy exist a small stuck accordingly pry them if you must. Now you to gorge neutral the dark head and the one silver ring to disassemble.

5) Remove the stickers above the front and the foundation of the tripod head. They gorge gauges above them representing degrees of a circle. if they're significant to you, touch them carefully without bending them.

6) Unscrew the screws that were below the stickers. The two screws (allen) are holding elastic parts which at expend include two of the three swiveling parts together; the foundation rotation (pan) and the phase to phase rotation. back the screws are unscrewed, touch complete of the elastic parts (there are two additional elastic pieces that are friendly of parallel gaskets).

7) Unscrew the two screws (allen) above either phase that include the forward/back rotation. draw the two parts apart.

8) Remove a hard steel barrel which will exist at one of the parts. You'll yell on that one phase has ridges that row up with ridges above the support. at this point, the head to exist apart. if you expectation to touch your handles at this point (not recommended) loosen them a lot, if necessary.

9) Wash the fate at silly Green (full strength) because this will touch complete of the old lubricant. Youâll gorge to vocation at this.

10) permit dry and attitude it complete help together lubricating because you go. Don't apply WD40. need at your local hardware department because the best type.

11) attitude the head help above the tripod, once you gorge it help above the aluminum tube. This is a small tricky, because there is a metal anxiety that sticks out and you gorge to friendly of include it help (it has a fountain back it) nevertheless youâre sliding at the tube.

Previous : Learn German = Topic = Photographic equipment

Next : Smartphone Camera Accessories for the Next Level || Malayalam photography